10 Pairs Full Extension 100-lb Ball Bearing Drawer Slides 8-24 With Screws

  
10 PAIRS SOFT CLOSE FULL EXTENSION 100-LB BALL BEARING DRAWER SLIDE. High quality cold rolled steel drawer slides. 10 pair of slides are designed for 10 drawers. Slide Length: 8", 10", 12", 14", 16", 18", 20", 22", 24. Slide Width: 1.77 inch (45 mm). Bracket size: Length: 3.5 inch, Width: 0.5 inch, Height: 1.77 inch. Extension Type: Full extension (3 fold fully extending ball bearing). These slides can be installed to face frame or.

Please keep 1/2 distance on each side of the drawers for proper operation. Screws: Screws for installations are included into the package. For bigger projects you can consider our 15 pair slides listings. Full extension slides also telescope, allowing the full length of the drawer to clear the cabinet. Choose these when you need easy access to the rear of the drawer, as in a file drawer.

Side mount slides are the most popular for kitchen applications and many others, as they offer the greatest variety of extensions, weights and durability. Side mount slides mount on the drawer sides and on the interior sides of the cabinet (sometimes with support at the rear or front). Mounting is usually simple, but can be more difficult if face frame cabinets are used.

Hardware is highly visible when drawers are open. Ball bearing features help to decrease noise during open and close the drawer. To determine which size of slides will fit your drawer, please measure the length of the drawer without the frame board. If the length is not even, please choose 1 inch shorter size. The length of slides can't be longer than the cabinet case.

Installation Manual For Face Frame Cabinet. Installation Manual For Frameless Cabinet. Lost package due to your address problem will not be re-sent or replaced.